Differences

This shows you the differences between two versions of the page.

--- email:configure-dkim-spf-dmarc [2025/03/05 21:08] – [DKIM (Domain Keys Identified Mail)] willy
+++ email:configure-dkim-spf-dmarc [2025/03/13 14:05] (current) – [Configure proper mail delivery] willy
@@ Line 1: / Line 1: @@
-====== Configure proper mail delivery ======
+====== I) Configure proper mail delivery ======
 You need access to your domain DNS records, this is mandatory.
@@ Line 47: / Line 47: @@
 This will create two files: **mydomain.com.private**, which contains the secret key, and **mydomain.com.txt** which contains the DKIM public signature that you need to incorporate in your DNS as a TXT record.
-+ Check postfix setup
+=== DNS record ===
-You also need to edit **/etc/opendkim/opendkim.conf** like this:
+As an example consider the following **mydomain.com.txt**:
+<code>
+mydomain.com._domainkey  IN      TXT     ( "v=DKIM1; k=rsa; "
+          "p=<< this is a very long line >>" )  ; ----- DKIM key mydomain.com for mydomain.com
+</code>
+You need to create a new TXT record in your DNS zone with //mydomain.com._domainkey// as key and //v=DKIM1; k=rsa; p=<< this is a very long line >>// as value.
+=== Postfix setup ===
+OpenDKIM acts as a //milter//, which means a mail filter, for Postfix. The postfix configuration described [[email:configure-postfix|here]] already include the required lines under the OpenDKIM setup comment.
+=== Socket Setup ===
+For security reasons you want the DKIM keys not to be readable by Postfix, but you want Postfix capable to access the OpenDKIM socket or it would not be possible to actually sign any outbound email at all. The default Gentoo users setup is not ideal for this, as you either let Postfix access the keys by adding it to the //opendkim// group or let OpenDKIM accesso postfix configuration by addig it to the //postfix// group.
+The solution is to add a new group, called **dkimsocket**, add the user //postfix// to it, then replace opendkim default group with it so that the socket gets created with the proper ownership:
+<code bash>
+groupadd dkimsocket
+usermod --append --groups dkimsocket postfix
+usermod --gid dkimsocket opendkim
+usermod --append --groups opendkim opendkim
+</code>
+=== Final wrapup ===
+Let's wrap it all up with the following **/etc/opendkim/opendkim.conf** file:
 <file - opendkim.conf>
 Syslog                  yes
@@ Line 59: / Line 84: @@
 UMask 0117
 UserID opendkim:dkimsocket
-+ qui cosa manca
 AutoRestart             Yes
 AutoRestartRate         10/1h
 Mode                    sv
+# Use the following lines for a single domain/selector
+Domain                  gardiol.org
+Selector                gardiol.org
+KeyFile                 /etc/opendkim/gardiol.org.private
+# Use the following lines for multiple domain/selectors, they use tables instead:
+#KeyTable           /etc/opendkim/key_table
+#SigningTable       /etc/opendkim/signing_table
+#ExternalIgnoreList /etc/opendkim/trusted_hosts
+#InternalHosts      /etc/opendkim/trusted_hosts
 </file>
+If you want to use multiple domains and selectors, you need to create the table files and put the multiple references there. Check the official OpenDKIM documentation linked above.
 === Start & Autostart OpenDKIM ===
@@ Line 78: / Line 111: @@
 After your DNS record has propagated, you can test it with:
 <code bash>
-opendkim-testkey -d mydomain.com -s mydomain.com -k mydomain.com.private
+opendkim-testkey -d mydomain.com -s mydomain.com -k mydomain.com.private -vvv
 </code>
+===== DMARC (Domain-based Message Authentication, Reporting & Conformance) =====
+OpenDMARC sample configutation can be found [[https://github.com/trusteddomainproject/OpenDMARC/blob/master/opendmarc/opendmarc.conf.sample|here]].
+This is pretty easy to setup, just edit the **/etc/opendmarc/opendmarc.conf** file similar to the following:
+<file - opendmarc.conf>
+AuthservID mydomain.com
+FailureReports true
+RejectFailures false
+SPFSelfValidate yes
+Socket local:/var/run/opendmarc/opendmarc.sock
+SoftwareHeader true
+Syslog true
+SyslogFacility mail
+TrustedAuthservIDs mail.mydomain.com
+HistoryFile /var/run/opendmarc/opendmarc.dat
+UMask 0002
+UserID opendmarc
+PidFile /var/run/opendmarc/opendmarc.pid
+</file>
+=== DNS record ===
+A DMARC DNS record can be pretty simple or pretty complex. [[https://mxtoolbox.com/dmarc/details/what-is-a-dmarc-record|this]] link can help explain it's format.
+The following is a simple example that you can start from:
+<code>
+_dmarc	IN TXT ( "v=DMARC1; p=reject; rua=mailto:postmaster@mydomain.com; ruf=mailto:postmaster@mydomain.com" )
+</code>
+where:
+  * p: policy, you want reject here most probably
+  * rua: email address to sent aggregate reports to (optional)
+  * ruf: email address to sent failure reports to (optional)
+=== Postfix setup ===
+OpenDMARC acts as a //milter//, which means a mail filter, for Postfix. The postfix configuration described [[email:configure-postfix|here]] already include the required lines under the OpenDMARC setup comment.
+=== Start & Autostart OpenDMARC ===
+<code bash>
+rc-update add opendmarc default
+/etc/init.d/opendmarc start
+</code>

Willy's Wiki

User Tools

Differences