Differences

This shows you the differences between two versions of the page.

--- homeautomation:home_assistant [2024/10/30 12:59] – willy
+++ homeautomation:home_assistant [2025/03/13 10:10] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
-====== Home Assistant ======
+====== C) Home Assistant ======
 [[https://www.home-assistant.io/|Home Assistant]] stand for Open source home automation that puts local control and privacy first. Powered by a worldwide community of tinkerers and DIY enthusiasts. Perfect to run on a Raspberry Pi or a local server.
@@ Line 49: / Line 49: @@
 ==== Setup Home Assistant ====
+The initial setup is described in detail [[https://www.home-assistant.io/getting-started/onboarding/|on these pages]], you should follow it carefully to get started.
+Some notes:
+  * Choose a static IP
+  * Choose a nice hostname (ex: //ha.mydoimain.com//)
+Then you should plug-in your protocol dongles, for example your ZigBee coordinator and set those up as well. See the dedicated pages.
+At this point you can start designing your rooms and areas. I suggest you define at this point all the floors and rooms that you have, so adding devices, lights and switches will be easier later on.
+You will want to install the File Editor extension, and sooner or later you will need to edit your **configuration.yaml** file by hand.

Willy's Wiki